Department of the Environment

About us | Contact us | Publications

Settlements Header ImageSettlements Header ImageSettlements Header Image

Environment industries archive

Disclaimer

Key departmental publications, e.g. annual reports, budget papers and program guidelines are available in our online archive.

Much of the material listed on these archived web pages has been superseded, or served a particular purpose at a particular time. It may contain references to activities or policies that have no current application. Many archived documents may link to web pages that have moved or no longer exist, or may refer to other documents that are no longer available.

DuPont - Cleaner Production - Butacite Plant Reduces Waste

This case study is no longer current with respect to the Company's business activities and operations and was not updated in the review of 2001, but is retained for informational, educational and historical purposes.

Background

DuPont is a large global chemical company - employing 100,000 people with 200 manufacturing sites in 40 countries.

Since its founding in the US in 1802 DuPont has been committed to safety excellence, with a philosophy that all accidents are preventable. This commitment has delivered a safety record 40 times better than the US industry average.

DuPont is now making the same commitment to environmental excellence and has set itself the Goal of Zero - zero waste, zero releases and zero emissions - for all its manufacturing sites.

Already good safety and environment practices are yielding significant financial benefits, with 1995 being DuPont's most profitable year ever with earnings of $US 3.3 billion worldwide.

DuPont operates three manufacturing plants in Australia:

This case study describes the cleaner production initiatives that have been implemented at DuPont's Wetherill Park plant.

Pre-Excisting Process

Butacite is a tear-resistant laminate made from a polyvinyl butyral resin (PVB). One or more PVB sheets are placed between sheets of glass, such as windscreens or glass panels. The application of heat and pressure initiates permanent bonding between the two layers of glass.

The Wetherill Park plant was established in 1988 to convert rolls of PVB sheeting into pre-cut blanks for automotive windscreens. The sheeting is imported from the US and arrives at the site in rolls with a plastic inner-core, packaged in cardboard boxes.

Cleaner Production Initiatives

A number of cleaner production initiatives have been initiated at the Wetherill Park plant.

Reducing the amount of trim waste generated when the PVB sheet is cut to the shape of a windscreen has been a particular focus for the plant. The traditional process involved cutting the blank so that there was an excess of approximately 100 mm on either side. This allowed easier fitting by the customer. The initiatives to reduce the amount of waste generated when this excess is trimmed of have included:

Both these initiatives have involved working very closely with the major customers to ensure these changes did not impact on product performance and ease of fitting. As a consequence the amount of "trim" waste has been significantly reduced.

All cardboard boxes and wooden pallets are recycled or reused. Approximately 2.7 tonnes of cardboard is recycled per month. The polythene packaging material used between the layers of PVB sheeting is also recycled.

The plastic inner cores of PVB rolls are returned to the US manufacturing plants for reuse.

Attention is also paid to the packaging used to transport the PVB cut-blanks to domestic customers. A returnable aluminium tray was designed by staff for daily cut blank deliveries to Sydney based customers. This replaced the previous system of cardboard boxes, of which several thousand were thrown away each year, and has won an internal recognition award. It is now being applied to other DuPont sites.

Advantages of the Process

Economic and environmental advantages from these initiatives have resulted with a reduction in waste going to landfill and re-use of products.

For example, solid waste generation has been reduced by approximately 70 per cent, with a consequent saving of $20,000 a year in waste disposal charges.

Returning the plastic cores to the US has reduced the number of new cores that need to be manufactured. The savings have not been fully quantified, however it has saved $20,000 to $40,000 per annum in material costs alone.

The cost of setting up the returnable aluminium trays was approximately $100,000 which is expected to be re-couped over a two to three year period.

The project aimed at reducing PVB "trim" waste by reducing windscreen template size and rationalising the number of templates was only completed in April 1997, so figures on cost savings are not available yet. However the benefits include:

Cleaner Production Incentive

The major incentive for reducing the PVB trim waste was cost reduction, both within the plant and for the major customers.

The Butacite Strategic Business Unit in the US started recycling the plastic cores. This initiated management at Wetherill Park to return cores to the US for reuse.

The cardboard recycling scheme was a site initiative. An engineering science student on work experience was asked to set up the waste minimisation scheme. This was an ideal project for work experience as the student could achieve the project within a month and see the on-going benefit of his work.

Barriers

No barriers were encountered by DuPont.

Date of implementation: 1996-97
Case Study Prepared: August 1997 by ACCP
Last reviewed: June 2001.
ACCP logo